Hello friends! I wanted to pop in today to let you know what’s going on around this pad. Since the flip house sold last month, we’ve been going crazy knocking out projects around our own house.
I painted the living room and kitchen and also painted about half of our front porch railing. We also installed a new kitchen floor and organized the garage. But my favorite project right now is the hot tub and paver patio we’re putting in!
A sweet friend from church mentioned she knew someone who wanted to get rid of a hot tub, and she asked if we were interested in it. We’ve always discussed how much we’d like to have a hot tub, but we didn’t want to spend a fortune on one. Well … long story short, we checked out the hot tub and bought it for $600!
Here’s a picture of it when we went to check it out before we bought it. Our little guy calls it the “hot pool.” 🙂
It’s a 6-person California Cooperage®. After we agreed to buy it, we had to figure out where in the world we were going to put it! Matt really wanted to create a paver patio for it, which I was reluctant to try because it seemed like a very labor-intensive project. I was leaning toward a poured concrete pad. We agreed to go with Matt’s idea and began preparing the backyard.
How to install a paver patio
We leveled about a 13’x13′ section with a rototiller, shovels and rakes. I say “we,” but mostly Matt tackled this part (praise God).
After Matt had everything fairly level and framed out, we added about an inch of sand, and Matt and Eva “dragged” it to ensure a completely level spot that would be ready for the paver base panels.
We chose these paver base panels instead of a stone base, simply for ease of installation. Matt said the price of the panels was comparable to using the crushed paver stone.
After laying out the panels in the framed area, the base was ready for the pavers. We chose Newline™ English Cobble™ stones. We mixed and matched the Riverbed Beige and Fieldstone colors, and set them in a random pattern. We were able to get the entire patio laid in one evening with me, Matt and the kids all helping.
After laying the stones, we filled in the cracks with polymeric sand from Lowe’s. We brushed that out, then wet the patio with a hose to set the sand.
Here’s the hot tub on its new patio base.
Whew. After that, it was on to the beautification process. As you can see, the hot tub was a bit faded, so I decided to stain the exterior cabinet. After much research, I decided on a ZAR® wood stain in Moorish Teak. For some very helpful information on how to stain fiberglass, plastic or other non-wood surfaces, click here.
You can see the dramatic transformation in progress. I stained the whole tub, and now I’m letting it “cure” for about a week. After that, I’ll go over it with a exterior-rated polyurethane with UV protectant built in.
While the stain dries, I’m landscaping around the new patio.
I’ve chosen all evergreen bushes and plants because I want the hot tub area to feel like a woodland oasis. I’m using 2B river stone around the plants.
I can’t wait to show you the “after” pictures when everything is done! Total, we’ll probably have about $2,500 invested in the hot tub, patio and landscaping. This is a chunk of change for sure, but nowhere near what we would have paid for a new hot tub, or for someone else to install the patio.
What do you think of our progress so far? Stay tuned for the final reveal coming soon.