Last-minute DIY gift idea
Hello friends! I hope you are enjoying this wonderful Christmas season. We are, for sure, although I wish (as usual) I was a little more prepared.
Today I wanted to share with you a quick, easy and inexpensive holiday gift you still have time to whip up for the folks on your list. 😉
You can knock about 10 of these out in less than 3 hours.
Step 1: Order 1-hour prints from Walmart.com.
You can pick up a copy of the free printable I used here. I also like to browse Pinterest for “Free holiday printables.” I chose 4×5.3″ prints at about 6 cents apiece. I rounded the edges of each print with scissors.
Step 2: Find a scrap board to use for the backs of the signs.
I chose these 2×6″ scrap boards from my garden shed.
Step 3: Cut 2×6″ boards to length on a miter saw.
This size is perfect because you don’t have to rip off any of the width. You only need to cut the pieces length-wise.
I cut my pieces about 6.5 inches long. (My prints were 4×5.3″ – or true digital size.) After cutting, I cleaned off the boards really well to prepare them for stain.
Step 4: Stain the pieces.
I chose Varathane® Wood Stain in Briarsmoke.* I like to brush stain on and allow it to soak in for a good two minutes before wiping any excess off. It creates a more uniform, rich color.
Step 5: Sand the edges of each piece.
This will give the blocks a weathered appearance and smooth any rough edges. I used an orbital sander for this step to help speed things along.
Step 6: Adhere the prints to the wood blocks using Mod Podge® matte water-based sealer.Â
This part always makes me nervous, but the sealer dries clear. I promise. 😉
Done! The wood plaques stand up nicely on their own, making them cute decorations for window sills and tabletops at Christmastime.
Have you DIYed any gifts this holiday season? I’d love for you to share your project(s) in a comment.
* Disclosure: This post contains affiliate links. If you click on a link provided and make a purchase through Amazon using my affiliation, I may receive compensation from Amazon. It does not cost you any more to purchase products using affiliate links. This blog is independently owned by me, and the opinions expressed here are my own. Thanks for supporting the quality content provided here through your readership and the use of affiliate links. Â
Can these be printed at home on photo paper? Or will Mod Podge make it run?
I think you could definitely print this at home on photo paper and it would work fine. Just go easy on the Mod Podge. Too much at once can make the paper bubble from behind. I’m still perfecting my Mod Podge techniques.
Here’s a great article with some tips on preventing problems with Mod Podge application: https://plaidonline.com/about/faqs/general/how-do-i-prevent-my-paper-from-warping-and-bubblin